Coat Measurer F Digital Coating Thickness Meter
Flexible probe Digital Coating Thickness Meter to measure the thickness of coatings on ferrous substrates upto 1250um.
Features:
- Flexible probe for smaller surfaces
- Backlit display for better readability
- Zero-point calibration and multi-point calibration
- Two measure modes: single and continuous
- Selectable um/mil measuring units
Applications:
This Gauge is designed for non-destructively measuring the thickness of coatings on ferrous substrates. It can be used to measure thickness of paint, galvanizing layer, lacquer layer, porcelain enamel, phosphide layer, copper tile, etc.
Measuring Principle:
This instrument has an external probe which uses the principle of electromagnetic induction to measure the thickness of non-magnetic coatings on magnetic substrates.
| Model | Metrix+ Coat Measurer F |
| International Standard | It meets the standards of both ISO 2178 and ISO 2361 as well as DIN, ASTM and BS. |
| Measuring principle | Magnetic induction(F) |
| Display | 4 digits backlit LCD |
| Measuring range | 0 - 1250um (0 - 50mils) |
| Accuracy | ±1-3%n or +2.5um |
| Resolution | 0.1um(0~99.9um); 1um(over 100um) |
| Units | um /mils |
| Minimum curvature radius | 1.5mm(convex) |
| 25mm(concave) | |
| Minimum measuring area | Diameter 6mm |
| Minimum thickness of substrate | 0.3mm |
| Additional features | Low Battery Indicator, Auto power off |
| Power supply | 4 x 1.5V AAA battery |
| Operation environment | Temperature: 0 to 50℃ ; Humidity: < 95% |
| Size & Weight | 145mm × 65mm × 25mm; 145g(not including batteries) |
| Standard Accessories | Coating Thickness Gauge, F probe, ‘0’ calibration block, standard foils, batteries, technical manual, hard carry case. |
| Optional Accessories | PC interface(cable and software) |
*Kindly note operation environment means room conditions for operation, not the testing/ sample condition.
| Catalogue: | Catalogue |
| Calibration Guide: | Calibration Guide |
